GeoAnalytics Connector: Calculated TravelAreas are not correct
Article Number: 000043174 | Last Modified: 2019/01/24
GeoAnalytics Connector using TravelAreas, it is possible to calculate travel areas and routes,making it visible in a map.
However, depending on the area information, it sometimes end up not getting the right travel area/routes.
The problem is that in the raw data there is sometimes short road segments that are not connected to the rest of the road graph.
If it happens to be the most closest to one of those road segments it will result in a small travel Area since the algorithm can not find a way out to the rest of the roads.
This is due to the raw data has limited area/route information.
For those which don't return an expected result, the point needs to be adjusted slightly if possible.