Qlik Sense URL(s) tested on SSLlabs (ssllabs.com) return the following weak Cipher suites:
TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 (0x9f) DH 1024 bits FS WEAK TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 (0x9e) DH 1024 bits FS WEAK TLS_DHE_RSA_WITH_AES_256_CBC_SHA (0x39) DH 1024 bits FS WEAK TLS_DHE_RSA_WITH_AES_128_CBC_SHA (0x33) DH 1024 bits FS WEAK
TLS_RSA_WITH_3DES_EDE_CBC_SHA (0xa) WEAKEnvironment:
- Qlik Sense Enterprise November 2018
All chiper suites used for TLS by Qlik Sense is based on the windows configuration (schannel). So if windows is configured not to allow these suites Qlik Sense should be secure.
Note: All the steps below need to be performed by Windows Administrator on Windows level. These steps are not supported by Qlik Support. Consult Windows Support before proceeding.
Please refer to following screenshot:

And the instructions are as follows: This policy setting determines the cipher suites used by the Secure Socket Layer (SSL). If you enable this policy setting, SSL cipher suites are prioritized in the order specified.
If you disable or do not configure this policy setting, the factory default cipher suite order is used.
SSL2, SSL3, TLS 1.0 and TLS 1.1 cipher suites: TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P256 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P384 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA_P521 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P256 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P384 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA_P521 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P256 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P384 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA_P521 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P256 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P384 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA_P521 TLS_DHE_DSS_WITH_AES_128_CBC_SHA TLS_DHE_DSS_WITH_AES_256_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_RC4_128_MD5 SSL_CK_RC4_128_WITH_MD5 SSL_CK_DES_192_EDE3_CBC_WITH_MD5 TLS_RSA_WITH_NULL_SHA TLS_RSA_WITH_NULL_MD5
TLS 1.2 SHA256 and SHA384 cipher suites:TLS_RSA_WITH_AES_128_CBC_SHA256 TLS_RSA_WITH_AES_256_CBC_SHA256 TLS_RSA_WITH_AES_128_GCM_SHA256 TLS_RSA_WITH_AES_256_GCM_SHA384 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P384 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P521 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P256 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P384 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384_P521 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P256 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P384 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256_P521 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P384 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384_P521 TLS_DHE_DSS_WITH_AES_128_CBC_SHA256 TLS_DHE_DSS_WITH_AES_256_CBC_SHA256 TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 TLS_DHE_RSA_WITH_AES_256_CBC_SHA TLS_DHE_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_NULL_SHA256 TLS 1.2 ECC GCM cipher suites: TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P256 TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P384 TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256_P521 TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P384 TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384_P521
How to modify this setting:1. Open a blank notepad document.
2. Copy and paste the list of available suites into it.
3. Arrange the suites in the correct order; remove any suites you don't want to use.
4. Place a comma at the end of every suite name except the last. Make sure there are NO embedded spaces.
5. Remove all the line breaks so that the cipher suite names are on a single, long line.
6. Copy the cipher-suite line to the clipboard, then paste it into the edit box. The maximum length is 1023 characters.